Results 1 to 2 of 2

Thread: Bearing blow-out

  1. #1
    Old Skool Switch-up's Avatar
    Join Date
    Mar 2011
    Location
    SF bay area
    Posts
    282

    Bearing blow-out



    I was camping on the Oregon coast this summer with my wife and friends. My buddy filmed one run from his car camera and my bearing blew out. Fortunately for me, I was not going fast yet. It could have been really ugly a couple of turns later. I have not ever paid much attention to bearings before this. I threw all my old bearings in the recycle that were rough at all and bought new Abec 5's per Bob Glashan's recommendation.

  2. #2
    oh, WORD skiskask8's Avatar
    Join Date
    Sep 2014
    Location
    Steamboat CO
    Posts
    1,049
    dang library not allowing the link :P, but i hear ya i quickly replaced my center bearings after they melted the wheel's glue to the poly from overheating
    "bone's reds" are cheap and i believe they are 7's
    Ratchets are my hands Stromae is my jam, the Mussels from Brussels.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •